we have noticed a design flaw with the creamer pitchers we use at the shop...there's a little gap between the vaccuum bottle lining and the plastic shell and cream has gotten trapped in there. We've tried soaking them overnite in purocaff, immersing them overnite in vinegar and water, but there's still little chunks of coagulated cream trapped in that crack.
Has anybody come up with a solution to what seems to be a common problem?
This doesn't sound like an appropriate cream dispenser. Is it NSF? I know that many carafes that are commonly used are labeled "not for use with dairy products" specifically for the reason you've described.
PuroCaff and vinegar are good for dissolving coffee crud, but wouldn't touch dairy. Gonna have to manually remove that. What about a toothbrush? Then a SERIOUS sanitizer treatment. Then re-purpose them and get different cream pitchers.
a little cafiza and hot water. cafiza can clean anything, not just coffee pots. I also use it every once and a while to clean the tarnish off of the sink
like I said, we used puro caff and we can't get it into the CRACKS between the vacuum insert and the outer shell??? It's like if you bang the thing, little chunks of curdled cream come out.
Permalink Reply by Andy on October 13, 2008 at 12:19pm
I am a firm adherent to Reduce Reuse Recycle but I think that it might be time to play a dirge for that pitcher. I have never been able to find a solution to that problem.
Not totally familiar with this particular carafe, but I have seen them used all over the place. I'll try to get a look next time I see one. Hopefully someone here that has more experience with this carafe will have something more useful for you.
That said, if there is a path for cream to get into an inaccessible area, it is not an appropriate cream container. If you can't clean it, don't use it.
The only reason I suggested that PuroCaff wouldn't work well on dairy is that, as I understand it, it is just an acid-based cleaner. We all know what dairy does when it comes in contact with an acid, right? Also, I don't believe that it is a sanitizer, which is clearly called for here. So it may work great for cutting crud from lots of stuff, but don't think its doing anything for food safety...
Puro caff has a seperate product called purocaff dairy this is the product I was refering to. It shines the inside of my dairy container and it looks like new. It also cleans the pump and all the parts.
whoever designed these pitchers needs to be shot. i hate them and have never found a cure for the curdled milk leaking from in between the plastic handled part and metal container. i'm searching for better pitchers that don't contain any plastic as it also absorbs the rancid smell of milk. any suggestions?
Hi Everyone,
I'm so late in writing this, but I did want to give everyone an update. Much thanks to the feedback, advice and support I received through this forum, I did eventually secure financing (for the entire amount needed - approx. $165,000...
I have a similar sized shop and we ordered 36-48 cup and saucer sets for each size we were offering. We bought 24 of each size for cold drinks, and just about 18 pastry plates and 18 sandwich plates (we really just use salad plates from a neighbor...
The reply has been super! Thank you. We have attracted special guests from around the continent who will be part of the volunteer group!
Email me for an official volunteer form to be filled out. The Volunteer team prize pack is growing with even m...
Hey!! Whats new with you Yang its been a little while? Unfortunately I am not in the coffee buiz right now :( Tough times call for tough measures. With our shop being bought out I wasn't really able to find much in the coffee industry. I miss it t...
Recognized worldwide as the most relevant and comprehensive standard for specialty coffee evaluation, the Q program has licensed just under 700 cuppers to date.
This five-day course encompasses training and exams that were created by the member v...
Are you enjoying Barista Exchange? Is it helping you promote your business and helping you network in this great industry? Donate today to keep it free to all members. Supporters can join the "Supporters Group" with a donation. Thanks!